Electron beam-induced deposition (EBID) is a process of decomposing gaseous molecules by electron beam leading to deposition of non-volatile fragments onto a nearby substrate. The electron beam is usually provided by a scanning electron microscope that results in high spatial accuracy (below one nanometer) and possibility to produce free-standing, three-dimensional structures.
Contents |
Focused electron beam of scanning electron microscope (SEM) or scanning transmission electron microscope (STEM) is commonly used. Focused ion beam can be applied instead, but then the process is called ion beam-induced deposition (IBID). The precursor material is gas, liquid or solid. Liquid or solids are gasified prior to deposition, usually through vaporization or sublimation, and introduced, at accurately controlled rate, into the high-vacuum chamber of electron microscope. Alternatively, solid precursor is sublimated by the electron beam itself.
When deposition occurs at high temperature or involves corrosive gases, specially designed deposition chamber is used;[1] it is isolated from the microscope, and the beam is introduced into it through a micrometre-sized orifice. Small orifice size maintains differential pressure in the microscope (vacuum) and deposition chamber (no vacuum). Such deposition mode has been used for EBID of diamond.[1][2]
The electron beam is scanned over desired shape resulting in deposition of material. The scanning is usually computer controlled. The deposition rate depends on the partial pressure and is of the order 10 nm/s.[3]
SEM or STEM electrons have energy too high (typically between 10 and 300 keV) to efficiently break molecular bonds. Therefore decomposition occurs via a two-step process: any materials (substrate, holders or the material that has already been deposited) near the deposition spot absorb primary electrons and re-emit secondary electrons having a wide spectrum of energies (of the order 1 keV) and angles. Secondary electrons decompose the precursor molecules.[3][4][5]
Primary STEM electrons can be focused into spots as small as ~0.045 nm.[6] However, the smallest structures deposited so far by EBID are dots of ~0.7 nm diameter.[7] The reason for reduced resolution is wide angular range of secondary electrons, and there is no straightforward way to overcome this problem.
The range of materials deposited by EBID currently (sept. 2008) includes Al, Au, amorphous carbon, diamond, Co, Cr, Cu, Fe, GaAs, GaN, Ge, Mo, Nb, Ni, Os, Pd, Pt, Rh, Ru, Re, Si, Si3N4, SiOx, TiOx, W,[3] and is being expanded. The limiting factor is availability of appropriate precursors, gaseous or having low sublimation temperature.
The most popular precursors for deposition of elemental solids are metal carbonyls of Me(CO)x structure or metallocenes. They are easily available, but produce carbon contamination.[3][8] Metal-halogen complexes (WF6, etc.) result in cleaner deposition, but they are toxic and corrosive.[3] Compound materials are deposited from specially crafted, exotic gases, e.g. D2GaN3 for GaN.[3]
Ion beam-induced deposition (IBID) is very similar to EBID with the major difference that focused ion beam, usually 30 keV Ga+, is used instead of the electron beam. In both techniques, it is not the primary beam, but secondary electrons which cause the deposition. IBID has the following disadvantages as compared to EBID:
The advantages of IBID are:
Nanostructures of virtually any 3-dimensional shape can be deposited using computer-controlled scanning of electron beam. Only the starting point has to be attached to the substrate, the rest of the structure can be free standing. The achieved shapes and devices are remarkable: